Van Accessories in Yate

Ply Lining offers the most basic, yet essential protection for the load area of your vehicle.

Our ply lining kits are designed and cut using the latest in CAD and CNC technologies, to ensure the perfect fit everytime.

All kits are pre-drilled to ensure that the kits are fitted identically, using the same number of fixings each and everytime.

Our ply lining kits are available for fitting at our workshop in Cwmbran, South Wales or you can take advantage of our mobile fit service, where we can arrange to fit at a time and location convenient for you.

Poly Lining offers the same great protection as ply lining, with a fraction of the weight.

This is the ideal solution for fleet operators looking to maximise the load capacity of their vehicle(s), whilst ensuring there is no damage to the outer of vehicle by cargo moving around in the load area.

• Massive weight saving benefit versus plywood
• Completely waterproof
• Very strong due to its 'bubble' construction core.

Carpet lining offers an aesthetically pleasing option compared with plywood, whilst offering the same protection

Our team will give your van a great look, trimmed in a high quality lining carpet to a very high standard.

Whether you are looking for simply the panels carpet lined, or the whole van including pillars and bulkhead, we have a solution for you

• Reduces road noise
• Improves insulation (we recommend insulating the van before carpeting)
• Available in a range of colours to suit your taste

Our phenolic floor lining is manufactured from high quality, phenolic resin impregnated birch plywood.

This offers anti-slip properties, and also improves vehicle protection over traditional plywood floors

• Anti-Slip
• Water resistant
• Oil resistant
• Increased protection to van

Our laser cut checkerplate lining offers the ultimate floor upgrade to your vehicle

Whether you are looking for a solution to carry chemicals, or simply need a very hard wearing floor, this is the ideal solution for you

To improve strength, we also fold the edges of lining over the ply board

• Extra strong floor lining
• Ideal for transportation of chemicals
• Laser cut and folded for a perfect fit

Bits4Vans are proud to offer a a number of steel racking ranges from a few select suppliers.

Whether it's a simple shelf system, or a bespoke racking system with cupboards and drawers, we really do have the perfect solution for you.

Our steel racking can incoporate:

• Drawer Units
• Lockable Cupboards
• A Sliding Vice
• A Workbench
• Foldable Shelving
• Shelf Dividers
• Rubber Mats

All steel racking supplied and fitted by us has been crash test accredited to 20g

Bits4Vans offer a complete solution for plywood racking.

All of our plywood racking is designed in house using the latest CAD technology, then cut on our state of the art CNC router. It is then assembled and installed into your vehicle.

Our design team will discuss your requirements with you, then arrange for the racking to go through our design and build process.

Our racks are built from 18mm plywood for sides, shelves and back stops and 12mm plywood for front up stands.

A false floor is the ideal solution to utilise some of the space in your van, which otherwise would be unused.

We design and install false floors to suit your requirements

Whether you want to store ladders, 8x4 sheets, lengths of material or anything else you may require...we will build the right solution for you.

In-van tool storage is quintessential to everyday business, so it is essential to keep the tools safe, tools which you work long and hard to pay for to ensure you can offer your services.

At Bits4Vans we always look for the best products to improve the safety of your tools.

We buys lockable tool stores from a few select suppliers, those who we believe offer the best products. We can then install these for you, like our other supply and fit products at a convenient time and location to keep your business moving.

Introducing the brand new Rhino Pipe Tube Pro.

The first complete redesign of Rhino’s hugely popular 3m PipeTube since its launch in 2005.

With an optional full length PVC lining, upgraded locking system, and rubber seals to eliminate water ingress.

Crash tested to ensure safety

Vecta Bar is tomorrow’s generation aerodynamic aluminium roof bar system for today’s most discerning van user. Developed and manufactured in Britain using the very latest technological advances in design, it successfully delivers the very best in strength, durability and aesthetics. Supplied, as standard, with FREE cam-buckle strap friendly, fully adjustable load stops this bar system represents unbelievable value. “Load.Lock.Go” ... it’s that simple!

Features:

• ‘Vecta Bars’ are made from superior anodised reinforced aluminium (Grade 6063) so won’t corrode
• Aerodynamically sloped roof bar profile deflects air to reduce wind noise & aid fuel efficiency
• Lightweight yet very, very strong at approx 2 ½ kgs per bar (jnc both legs & fixings)
• Supplied with four FREE fully adjustable load stops per roof bar system which can be used in conjunction with Hubb Systems branded 25mm cam-buckle straps (bought separately)
• Roof bar profile has clever T-Track system allowing the use of our load stops, eye bolts, beacon brackets and other accessories
• Designed and Made in Britain
• Crash tested to 20g at Horiba-Mira Test Facility (see certification)
• Designed to carry up to 75 ½ kgs per bar (distributed evenly and subject to ‘Vehicle Handbook’ guidelines)

The Vecta Roll rear roller system attaches to the rear most roof bar, offering the user a convenient and safer way of loading or unloading, whilst also protecting the rear of the vehicle. It’s novel ‘wrap around’ design ensures that it’s fitted in the quickest time possible.

• Contemporary design which is not only pleasing to the eye but also fully functional
• 35mm diameter stainless steel vehicle specific roller bar offering strength (up to 50kgs) and excellent anti-corrosion properties
• Roller arm has clever “wrap around” system which fits snuggly to the rear roof bar for the quickest possible fitment & maximum stability
• Phosphated steel roller arms which have been black powder-coated for maximum weather protection
• Supplied with M10 adjustable support feet to allow for the optimum positioning
• Roller arm supports also supplied with plastic foot pads
• Designed and Made in Britain

Fuel efficient bar design! The Delta Bars System combines the benefits of a modern aerodynamic profile shape to minimise wind noise and significantly reduce fuel consumption.

• As well as the above, the Delta Bar System retains the virtues of strength using light yet strong high-tensile alloyed steel.
• The system offers superb strength and versatility for the transportation of loads, supported by an excellent array of optional extras.

Not enough space in the back of the van? In need of making the perfect use of all of the space you have available on your vehicle? Our “Next Generation” AluminiumRack is the answer to your equipment transportation needs.

Manufactured From Anodised Aluminium Alloy
• Aerodynamic Crosstubes Reduce Wind Noise & Drag
• Supplied Complete With A Full Width Stainless Steel Roller
• Anti-Rattle Connectors & Aerodynamic End Caps
• Quick & Easy Assembly
• Available To Fit To The Majority Of Today’s Commercial Vehicles
• TUV Rheinland Certified – 20g Crash Tested

The Modular Rack is a fully welded, heavy duty system that allows quick and easy installation using bolted together modular sections. The rack includes an aerofoil that significantly reduces overall wind noise and drag as well as a full width roller system that aids loading and unloading. All racks enable the transportation of 8′ x 4′ boards

Whether you are looking for a rear step for safe access to loads, or you require bumper protection, we can offer you the perfect solution

We offer rear access steps from 3 main manufacturers, to ensure we have the right product for you


AccessStep from Rhino Products

• Steel frame with hard wearing ABS moulded plastic anti-slip tread plates
• Available with or without parking sensors
• Available in yellow or black

AssuredStep from Hubb Systems

• Heavy Duty, tough, hard wearing powder coated steel step
• Anti-Slip Tread Plates
• Available with or without parking sensors
• Available in orange or black

Safe-T-Bar

• Full width bumper protection from knocks when loading/unloading
• Available with or without parking sensors
• Anti-Slip Tread Plates

Our side access steps can be used for a wide range of requirements, including taxis, ambulances and those needing assistance when entering / exiting the side door of their vehicle

Electric and manual steps available, and can be foot operated, or open automatically with the sliding door.

The Hubb Systems Load Lite™ is one of the most innovative and ergonomic ladder loading systems available in today’s marketplace, designed to maximise safety and provide you with the easiest possible access to your ladders.

Manufactured from lightweight, highly robust aluminium alloy and complimented by stainless steel parts it boasts one of the biggest carrying capacities available. Safety and functionality at an affordable price!

Features:

• Manufactured from lightweight, extremely robust aluminium extrusion (Grade 6082) that won’t corrode and is complimented by the highest quality components.
• Load or unload ladders safely in seconds from ground level rather than climbing onto your vehicle.
• Available in two versions to transport single or double sets of ladders.
• Fully adjustable to accommodate most ladder types.
• Two lengths to choose from to suit; 2.5 metres or 3.0 metres.
• 20g crash tested at Horiba-Mira Testing Facility (see certification).
• “Click into place” orange release catches to help ensure that the system is securely locked into place before the vehicle pulls away.
• Supplied with orange Hubb Systems branded 25mm cam-buckle straps to secure ladders into place, which have been tested to a 300kg load capacity (see Certificate of Conformity).
• Designed and manufactured in Britain.
• System will accommodate up to 2 padlocks (not supplied) to help restrict potential theft.
• This product has undergone rigorous testing to ensure product longevity and the maximum possible safety.
• Individually numbered with identity plaque to ensure full traceability.

SafeClamp^™ incorporates strength, speed and style to provide a revolutionary ladder clamping system.

SafeClamp^™ uses a composite beam structure and stainless steel anchor hook which offers high strength whilst providing excellent corrosion resistance

The innovative one touch clamping method (patent pending) ensures that the operation is 5 times faster than traditional screw-down ladder clamps.

Supplied complete with key locks, 2 keys supplied

Rear door ladders have been designed with user-friendly round hand rails and anti-slip tread plates to enhance safety. Bespoke fitting kits (available for most popular van models) make installation quick and easy.

Supplied with anti-slip treads as standard

SafeStow4 is the perfect tool for transporting ladder systems on the roof of your vehicle. SafeStow4® enables you to load/unload, secure and assists in lifting ladders onto the roof of your vehicle all from the safety of ground level at the rear of the vehicle.

• Enables Safe Loading, Securing & Lifting Of Ladders Onto The Roof The Vehicle
• New BeltStow & Anti-Vibration Assembly System Enhances Overall Ladder Protection
• Available In Four Options To Carry Single, Dual, Extra Wide & Special Purpose Ladders
• Special Purpose SafeStow4® Designed For Carrying Fibre Glass Ladder Systems
• Fully Adjustable Gas-Ram Assisted Lifting & Lowering
• Constructed From Highly Robust Aluminium Alloy
• Stainless Steel Components
• Available in 2.2 & 3.1m Lengths (van dependent)
• Lockable For Added Security (Padlock Not Included)
• TUV Rheinland Certified & 20g Crash Tested

SafeStow4 has been designed to fit to roof rack or roof bar systems (minimum of 3 cross bars required) in order to load, secure, lift and lower your ladder systems whilst keeping both feet firmly planted on the floor.

SafeStow4 is constructed from highly robust aluminium alloy which makes it lightweight, rust resistant and aesthetically pleasing to enhance your roof bar or roof rack system. Ladders are better protected than ever with our new Anti-Vibration assembly, hardwearing double restraining strap system and new wider and deeper rubber cross bar inserts.

SafeStow4 also features our new BeltStow system which has been designed to securely hold straps away when ladders are not in use on the SafeStow4

Bits4Vans offer a range of beacons from reputable manufacturers to suit all applications.

Our range includes LED, strobe, xenon, rotator and incandescent with a variety of light intensities.

All flashing beacons are professionally installed by our install teams, at a time and location to suit you.

Our grille and pillar lights offer a fantastic light output with an exceptional wide viewing angle while only drawing 7 watts.

These strobe lights are ECE Reg 65 compliant and IP67 waterproof rated.

Multi-voltage for use on 12 or 24 volt vehicles

Our range of worklamps are the perfect solution to offer directional light to the areas you require.

We can install our worklamps in a position which best suits you, to ensure you have the best light in the area you require it most.

Our worklamps draw just 27 watts of power, whilst offering a fantastic 2600 lumens.

We offer a range of LED lights which will greatly improve the lighting within the cargo area.

We will discuss your requirements with you, to ensure the lights we offer are the solution you require to light the cargo area for the purpose you desire.

OE lighting is rarely sufficient to light the cargo area of your vehicle, so additional/replacement lighting is essential to make your cargo area work for you.

Fixed Towbars are available as fixed flange or swan neck. With a fixed flange, it is possible to tow and carry cycles at the same time.

• Not suitable for use with bumper shields
• Suitable for use with AL-KO towballs
• Can be used with an adjustable height plate
• A choice of towing couplings and accessories can be fitted

Available with 7 or 13 pin electrics

We offer complete installation of detachable fixed flange or swan neck Towbars. With a detachable fixed flange, it is possible to tow and carry cycles at the same time.

• Compatible with AL-KO stabilisers
• Less likely to trigger reversing sensors
• Cannot be fitted with a bumper shield

Available with 7 or 13 pin electrics